Installing CyanogeMod 12.1 on YU Yuphoria

Step by Step guide to manually installing CyanogeMod 12.1 on YU Yuphoria.

Cyanogen Team has announced that it's official Cyanogen OS 12.1 update is in it's final stage of testing but if you're tired of waiting for it's release then you can try CyanogenMod 12.1 from the CM community. A stable release of the of CM 12.1 for YU Yuphoria lettuce is now available.

This blog post will list steps to install CM 12.1 on your YU Yuphoria. In case you aren't aware CyanogenMod is different from Cyanogen OS while the former is developed by community members Cyanogen OS is the official ROM from Cyanogen Team.

[Disclaimer]: Manual installation of ROMs if not performed carefully may result in bricked device. If you're not comfortable with custom ROMs or manual installation we recommend you to get help.  Blog cannot be held responsible for bricked device or unexpected results after the installation.

Requirements : Checklist before installing the Custom ROMs

• Make sure the device is rooted before going ahead with custom ROM installation.
• The new CyanogenMod CM12.1 [official] Android 5.1 Lollipop custom ROM - has to be installed on the YU Yuphoria aka lettuce model only.
• Users are advised to pay close attention to the CM release version and check whether the version of their third party installs (kernels, mods, gapps, etc) are compatible with the custom ROM.
• Installation of custom ROM requires clearing of memory in the smartphone, so make sure to back all the data by installing Clockwork Mod (CWM) Recovery/ TWRP in the smartphone.
• Make sure to install USB driver in the PC, or else the smartphone (Yuphoria) will not be recognised by the computer.
• Make sure your device has more than 80% battery, or else there is a chance of the smartphone getting temporarily bricked if the installation process is interrupted midway.

Downloadable Cyanogen CM12.1 (Android 5.1 Lollipop) files:

CM12.1 Custom ROM Snapshot [Stable] for YU Yuphoria (aka lettuce): HERE
[Note:Build date: 01 September, 2015]

Cyanogen Recovery: HERE

Google Apps: HERE

Tutorial: Step-by-step procedure for installing CyanogenMod (official) CM12.1 Snapshot Android 5.1 Lollipop Custom ROM on YU Yuphoria (aka lettuce) model

Step 1: Download CyanogenMod CM12.1 [Snapshot] Stable custom ROM and connect Yuphoria to PC via USB.

Step 2: Place CyanogenMod CM12.1 ROM zip file into the phone's memory (root-folder only).

[Note: Before users' begin installing the custom software, be sure that the device must be rooted and has installed ClockworkMod Recovery/TWRP tool.]

Step 3: Turn off the device and disconnect from the PC.

Step 4: Enter the Recovery Mode by press holding – 'Volume Up + Volume Down + Power'- buttons.

Step 5: After entering the RECOVERY mode, clear the phone memory, by selecting 'wipe data/factory reset'.

Step 6: Clear the cache memory by choosing 'wipe cache partition'.

Step 7: Go back to ClockworkMod recovery, and select 'advanced' and tap 'wipe dalvik cache'. [optional but recommended]

Step 8: Come back to main recovery screen and then tap 'install zip from SD card'.

Step 9: Tap 'choose zip from sdcard' and go to software ROM .zip file in SD card and enter the installation process.

Step 10: Once done with the installation process, re-start the device by opting 'reboot system now' seen in the recovery menu.

Yuphoria will take a few minutes before rebooting after that if you will have the much awaited CyanogenMod 12.1 on your Yuphoria.

                   

Update Oneplus 2 with Oxygen OS 2.1

                       

Update Oneplus 2 with Oxygen OS 2.1

Step 1. Download the full ROM zip file of Oxygen OS 2.1 here and don’t unzip or extract the folder.
Step 2. Download the SuperSU zip file here to get the root access on your phone. Again don’t unzip or extract the folder.
Step 3. Once both the files are saved on your PC move both the downloaded files on your Phone.
Step 4. Boot your phone in TWRP recovery mode to flash these files. See here how to boot in recovery mode.
Step 5. Once you on the recovery mode. Select the Wipe option > Advanced Wipe > Select system, cache, Dalvik and Wipe them.

Step 6. GO back to the main menu, Select Install And Flash the Oxygen OS Zip file.
Step 7. Now Flash the Super SU zip file to get the root access on your phone.
Step 8. Go back and Reboot the device to the OS.

OnePlus 2 USB Drivers Installation

OnePlus 2 USB Drivers Installation Guide

Oneplus Two is officially launched with some great specs and features. Here in this guide we’ll show you how to install the Oneplus Two USB drivers on windows PC. Without SUB driver you can access your phone on the windows PC. To access the phone with the PC, you need proper USB drivers. In this post, we show you how to install USB, ADB and Fastboot files on your windows PC. The process is very simple and takes a few minutes to complete the whole setup. With the help of these drivers you can easily manage your phone on windows and they are also useful to install the custom recovery or root your phone on your windows PC.
To get started all you have to run one exe file on your windows machine and make some change on the device manager to setup the drivers. Read all the instruction very carefully and follow them step by step on your phone.
                         

Install Oneplus 2 USB drivers on Windows

Step 1. Download the 15-second adb/fastboot installer  and run the exe file on your windows PC to complete the setup.

Link

See the screenshot below:-




Step 2. Once completed you will see fastboot/adb folder on your C drive (C:\adb). These are the ADB and Fastboot files, which are usefull to run ADB coomands to unlock bootloader, install recovery etc.

Step 3. Now to setup the USB drivers, connect your phone to the PC and open the Device manager. Now here you will see your phone under the portable device or other devices. See the screenshot below:-

Step 4. Right-click on it and select update driver software.
                                     
Step5. Now the new popup windows will come on your windows screen. From here click on the “Browse my computer for driver software”




Step 6. On the next screen click on the “Let me pick from a list of device drivers on my computer” and hit the next button.


Step 7. Now on the next screen select the “Android Device” or “Android Interface” option and hit the next button to proceed.


Step 8. On the next screen you will see all the ADB drivers that are installed on your windows. Here select the “Android ADB Interface” and click on the next button to complete the process.


Step 9. ADB Drivers and USB drivers are now properly installed. To check it is working or note. Go to the ADB folder on your C Drive which the exe installer created on Step 2.

Step 10. Connect your phone to the PC with USB cable and open a command prompt window in your fastboot/adb folder (C:\adb\). To do this Hold Shift button on your keyboard and right-click on the empty space of the folder. See the screenshot:-



Step 11. Once the coomand promt window si sopen run the follwoing coomand and check your devcie is attached or not.
adb devices

Enjoy ! Now the Oneplus Two USB drivers are successfully installed don your windows PC

Setup ADB & Fastboot Drivers For Nexus, Oneplus, Samsung or Any Android

Proper Way to Setup ADB & Fastboot Drivers For Nexus, Oneplus, Samsung or Any Android

“Here is the proper way to install the ADB and Fastboot drivers for Nexus, Oneplus, Samsung or any other Android devices.” Here in this guide we show you the complete setup guide with the screenshots. This guide will work with any android smartphone or tablets. To connect you android to the windows PC you need these fastboot files and ADB drivers, without these you can’t connect your phone to the PC and not even run the ADB commands to flash custom ROMS, unlock bootloader etc. The process is very simple and takes a few minutes to setup the ADB & Fastboot Drivers.
As we mention above this guide will work on any android device and one of the fastest ways to setup the USB drivers on windows PC. All you need to run one application on your PC and make some change on your Device manager and you are done. Before following this guide remove any existing android drivers that may cause you problems. Or you have older Google USB Driver installed, please uninstall it from Control Panel before installing new.

Setup ADB & Fastboot Drivers

Step 1. To get started, download the 15-second adb/fastboot installer here and run the file on your windows desktop.
Step 2. Press Y/Yes to install ADB and Fastboot drivers and follow all the steps to continue the driver installation. Once completed you will see fastboot/adb folder on your C drive (C:\adb).

Step 3. Now the Files are installed on your desktop, next step is to configure them and setup the drivers.
Step 4. Pick your phone up and go to Settings > About Phone and tap on Build Number 7 times until you’ve enabled Developer Options, then go back to the main settings menu and go to Developer Options that magically appeared right above About Phone. And Enable Android Debugging / USB Debugging mode.
Step 5. Now connect your phone to the PC with USB cable and open Device Manager and look for your phone. It will show up under Portable Devices as your phone model number or Other Devices or ADB Interface or Android. See the screenshot below:-

Step 6. Right-click on it and select update driver software.

Step 7. Now new popup windows will appear on your screen. From here click on the “Browse my computer for driver software”

Step 8. Now from the next screen click on the “Let me pick from a list of device drivers on my computer” and hit the next button.

Step 9. From the next screen click on the “Android Device” option and hit the next button to proceed.

Step 10. Now on the next screen you will see all the ADB drivers that are installed on your windows. Here select the “Android ADB Interface” and click on the next button to complete the setup process.

Step 11. ADB Drivers are now properly installed. To check it is working or note. Go to the ADB folder on your C Drive which the installer created on Step 2.
Step 12. Connect your phone to the PC and open a command window in your fastboot/adb folder (C:\adb\). To do this Hold Shift button on your keyboard and right-click on the empty space of the folder. See the screenshot:-

Step 13. Now the command prompt windows will appear on your desktop. And enter the following command and you will see the screen with a list of devices attached. This means the drivers are properly installed and your android is successfully connected to the window PC.
adb devices

iPhone 8.1.3 Firmware (Flashing) Files download Restore.ipsw

 

iPhone 8.1.3 Firmware:

iPhone iOS latest version 8.1.3 firmware has been released and It has been given here to free download. If you are looking for it then scroll down and click on any of the given downloading links at the bottom of this post. There has been given the most latest firmware for iPhone iOS. You will be able to download latest firmware for version 8.1.3 iOS. iPhone iOS 8.1.3 is the latest version at the time of this article publication, which you will download from here.

To download iPhone 8.1.3 firmware, click on the most accurate downloading link below. There are many links has been given to free download. Before going to downloading just check your mobile's specification and then choose the right downloading file for your phone. Every link is containing a direct downloading link from iPhone officials, when you will click on any link from them then the latest firmware will be starting to download directly from iPhone officials. So get start here.

 

 

 

  

 iPhone 4 S 8.1.3

 

iPhone 5 GSM 8.1.3

 

iPhone 5 GSM+CDMA 8.1.3

 

iPhone 5c GSM 8.1.3

 

iPhone 5c GSM+CDMA 8.1.3

 

iPhone 5s GSM 8.1.3

 

iPhone 5s GSM+CDMA 8.1.3

 

iPhone 6 Plus 8.1.3

 
iPhone 6 (8.1.3)

New Flashtool (0.9.19.1) brings compatibility to all Xperia devices

 

New Flashtool (0.9.19.1) brings compatibility to all Xperia devices.

Flashtool developer Androxyde has updated the must-have utility for Xperia owners to build number 0.9.19.1. The big feature in this latest version is that it supports all Xperia devices.

If you remember, the last Flashtool version (0.9.19.0) brought support for the 2015 Sony Xperia devices. However, the method to flash devices was slightly different with a FSC (Flashtool Script) needed. Therefore, if you were using an older Xperia model (2014 series and older) it was recommended to use the prior Flashtool release (0.9.18.6).
Flashtool 0.9.19.1 marries both prior versions together, so if no FSC is found, Flashtool will use the old method of flashing as seen in Flashtool 0.9.18.6.

The latest version of Flashtool can be downloaded here. A word of caution on the installation, Androxyde mistakenly placed a couple of folders in the wrong location. This means you may not be able to open Flashtool. To solve this, navigate to the following folder: “C:\Flashtool\x10flasher_lib\winjre” where you will find two folders inside (winjre32 and winjre64). Place these two folders one level higher i.e. at “C:\Flashtool\x10flasher_lib”. It should be placed as can be seen in the picture below.
Update: A new version of Flashtool (0.9.19.2) has been released that fixes the bug above.

Thanks Saper!